GRP SAFETY GATES
Studies show amerikabulteni.com cipla viagra india that erection problems often occur in older people after the treatment of prostate cancer. Match Up! Create a worksheet with a left column listing emotions and in the right column list possible behavioral responses that would best match up viagra sample india with the emotions in the left column. With that in mind, it is strongly urged that men discuss http://amerikabulteni.com/2011/12/18/nfl-week-15-games-results/ viagra for sale australia the specifics of their case carefully with their doctors. All you need is an internet connection and cialis vs viagra a log in password after you enroll yourself for a course.
All are manufactured from our corrosion-resistant pultruded structural GRP profiles and can either be added to existing installations in steel or timber or as part of a complete GRP walkway system.
All gates come with composite self-closing hinges and can also be built to have a locking mechanism applied.
Safety Gate Installation Instructions
All Safety Gates are supplied pre-assembled, and installation on-site is relatively straightforward. The Safety gate can easily be cut to size on-site for an exact fit. Please remember to allow a minimum of 3mm for the swing arm of the safety gate to rest on the support block and guard rail support post.
Mounting the Hinge
The hinge must be installed as close as possible to the top of the guard rail. Locate and drill 2 holes of Ø 12.5mm on 158mm centers for the M12 hinge bolts, and tighten to the construction.
Mounting the Support Block
Locate and drill toe holes of Ø 6.5mm at 32mm centers for the M6 block bolts, and tighten the support block to the guard rail.
Please note: The Support block should be fitted approximately 1.5mm below the closed position of the safety gate to ensure smooth operation. The support block has been designed to prevent any possible vertical deflection.
MATERIAL CHARACTERISTICS
Two main components produce composite GRP: polyester resin and glass fibres. There are several types of resin systems depending on the application: Isophthalic, Orthopthalic, Vinylester and Phenolic. Isophthalic and Orthopthalic polyesters are the most widely used resin types and are suitable for most industrial, rail, construction, marine and waste management applications. Phenolic and Vinylester are available by special order.
Quality Assurance
Manufactured in accordance with our ISO 9001 accredited Quality Management System, the structural integrity of the specified material is high grade.
A suggested life span of 25 years is expected, but not guaranteed, and is based on a number of variables: environmental, installation process, maintenance, loading, and traffic conditions.
Slip Resistance
The integral angular quartz gritted surface has been Tested in accordance with BS7976-2 and provides an exceptional level of slip resistance. Lifespan depends on frequency of use.
Chemical Resistance
GRP is resistant to a wide range of chemicals, across a wide temperature spectrum. GRP can be made using different resin systems to achieve specific chemical resistant properties. Please refer to chemical resistance chart SOS-DST-10.
Fire Resistance
All products contain a fire-resistant additive and comply with Euro Class 1 and ISO11952-2. Performance is equivalent to ASTM E84 class 1 and BS476 part 7class2 flame spread to give a 30 minute burn time.